IMPORTING A MODEL (FROM GOOGLE WAREHOUSE) USING SKETCHUP
 
blackraign9
post Feb 28 2012, 12:43 AM
Post #1


Upcoming director


Group: Members
Posts: 94
Joined: 2-August 10
Member No.: 10,439



I have a Mac. I imported a model using Google Sketchup and then exported it to my computer as a Google Earth file. I am trying to unzip it and convert it for use within Moviestorm. I was trying to following the instructions given in Modshop Beginners guide that says I need to download both NBCONV and 7ZIP which I did. But when I try to run these application, the only thing that happens is a text file opens up with a message stating this program cannot run in DOS.

What am I doing wrong? Is there another way to export 3d models into Moviestorm using an Imac?

Thanks.

Attached is what the text file looks like when I try to run 7zip
Go to the top of the page
 
+Quote Post
 
Start new topic
Replies (1 - 7)
primaveranz
post Feb 28 2012, 2:31 AM
Post #2


Master Director
Group Icon

Group: Pioneers
Posts: 4,673
Joined: 28-August 08
Member No.: 2,534



Why are you saving the file as a Google Earth file?
And where are you reading the instructions from? It sounds to me like they are out of date.
Admittedly I don't have a Mac but I understood that they now had the ability to use the Importer wizard for Sketchup. If so, you just need to download the file from the Warehouse and save it in Sketchup 6 format then open the Modders Workshop and use the import option.
You do have a logon for Modders Workshop don't you?


--------------------
"I have had the same problem with getting the wheels to rotate properly with animated cars. They have to be all the same size and round and that helps a bit." America's Top Modder.
Go to the top of the page
 
+Quote Post
lucindamc123
post Feb 28 2012, 2:47 AM
Post #3


Master Director
Group Icon

Group: Pioneers
Posts: 9,170
Joined: 22-April 07
Member No.: 341



Some of the models in Google Sketchup Warehouse only come as KMZ or Collada files. I have never been able to figure it out either. They just don't unzip at all.


--------------------
Go to the top of the page
 
+Quote Post
Ben_S
post Feb 28 2012, 5:11 PM
Post #4


Master Director
Group Icon

Group: Administrators
Posts: 4,612
Joined: 18-January 07
Member No.: 116



I think you may have found some somewhat out of date instructions.

Using the sketchup importer on a mac now requires:
Update Moviestorm to at least 1.5.1 (or 1.5.2 if you have leopard or tiger).
Download the sketchup file (in the format for sketchup 8 or older).
Start the modders workshop
(wait)
From the menu select 'Wizards'->'Import from sketchup'
Go through the wizard's steps.

I would sugest trying with a simple model first - there are sketchup models that have substantially more detail (polygons or textures) than works well in Moviestorm. I would sugest looking for models with a smaller filesize, such as under 2MB.


--------------------
Ben Sanders
Moviestorm Ltd
Go to the top of the page
 
+Quote Post
meromio
post Apr 15 2013, 4:33 AM
Post #5


Moviegoer


Group: Members
Posts: 1
Joined: 13-July 10
Member No.: 10,219



i loaded a mac version yesterday, it says 1.5
how do i get 1.51, or 1.52?
i see sketchup 8 in the wizard but it cannot see my model for some reason, either saved as ver 6 or 8.
any ideas?

QUOTE (Ben_S @ Feb 28 2012, 5:11 PM) *
I think you may have found some somewhat out of date instructions.

Using the sketchup importer on a mac now requires:
Update Moviestorm to at least 1.5.1 (or 1.5.2 if you have leopard or tiger).
Download the sketchup file (in the format for sketchup 8 or older).
Start the modders workshop
(wait)
From the menu select 'Wizards'->'Import from sketchup'
Go through the wizard's steps.

I would sugest trying with a simple model first - there are sketchup models that have substantially more detail (polygons or textures) than works well in Moviestorm. I would sugest looking for models with a smaller filesize, such as under 2MB.

Go to the top of the page
 
+Quote Post
primaveranz
post Apr 15 2013, 7:29 AM
Post #6


Master Director
Group Icon

Group: Pioneers
Posts: 4,673
Joined: 28-August 08
Member No.: 2,534



QUOTE (meromio @ Apr 15 2013, 4:33 PM) *
i loaded a mac version yesterday, it says 1.5

Is that an Education version? I think Ben said that they don't automatically update. If it is not then it should automatically offer you an update if you start MS then wait a few secs before pressing "Start"


--------------------
"I have had the same problem with getting the wheels to rotate properly with animated cars. They have to be all the same size and round and that helps a bit." America's Top Modder.
Go to the top of the page
 
+Quote Post
blackraign9
post Jun 12 2013, 5:08 PM
Post #7


Upcoming director


Group: Members
Posts: 94
Joined: 2-August 10
Member No.: 10,439



QUOTE (Ben_S @ Feb 28 2012, 5:11 PM) *
I think you may have found some somewhat out of date instructions.

Using the sketchup importer on a mac now requires:
Update Moviestorm to at least 1.5.1 (or 1.5.2 if you have leopard or tiger).
Download the sketchup file (in the format for sketchup 8 or older).
Start the modders workshop
(wait)
From the menu select 'Wizards'->'Import from sketchup'
Go through the wizard's steps.

I would sugest trying with a simple model first - there are sketchup models that have substantially more detail (polygons or textures) than works well in Moviestorm. I would sugest looking for models with a smaller filesize, such as under 2MB.


Hi there!

I posted this help request about a year ago and I am just now getting back into modding and importing 3d assets from google 3d warehouse into Moviestrom via Sketchup.

What I want to know is if the above procedure described by Ben still applies. I have a Mac. Do I need to get a modders license first and then download Modders Workshop?

Are there any video tutorials that exist for this procedure?

Thanks very much for any assistance.

Chris
Go to the top of the page
 
+Quote Post
primaveranz
post Jun 12 2013, 8:23 PM
Post #8


Master Director
Group Icon

Group: Pioneers
Posts: 4,673
Joined: 28-August 08
Member No.: 2,534



Have you watched this one? :- http://www.moviestorm.co.uk/hub/modding/modding1


--------------------
"I have had the same problem with getting the wheels to rotate properly with animated cars. They have to be all the same size and round and that helps a bit." America's Top Modder.
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members: